Connect all your monitors and audio video together.
Amplifiers & Splitters
Click a picture to enlarge.
|
2 X 4 Video/Audio Amp/Pwr Sup DAPS300 |
 |
$1,141 DAPS300 Spec Sheet | Manual |
|
2 X 7 Composite Video Splitter DAPS321 |
 |
$938 DAPS321 Spec Sheet | Manual |
|
VGA Distribution Amp/Pwr Sup DAPS350 |
 |
$1,250 DAPS350 Spec Sheet | Manual |
|
4 X 4 Audio/Video Switch DAPS440 |
 |
$1,500 DAPS440 Spec Sheet | Manual |
| 4 X 4 Audio/Video Switch DAPS440-SW |
 |
$2,494 DAPS440-SW Spec Sheet | Manual |
| HDMI Video/Audio Distribution Amp 28VDC DAPSHDMI-1  |
 |
$3,413 DAPSHDMI-1 Spec Sheet | Manual |
The purpose of the DAPS product line is to amplify and distribute Video and Audio signals to a variety of sources within the aircraft. If you have any questions, please contact us.
DAPS300
This will split audio and video from two input sources to four outputs per input. The DAPS300 is the only product that will split S-Video in an aircraft. It also allows you to take in an S-Video input and change it to a composite output, or take in a composite input and change it to an S-Video output. This unit has 12VDC Output of 36 Watts.
Output: S-Video, Composite video, L&R Audio (2x4), 12VDC (3)
Power: 28VDC @ 3 Amps
DAPS321
This unit will split composite video from two input sources to seven outputs per input. The DAPS321 allows you to adjust the gain settings of each output with an adjustment screw. This is good for long and short video runs of the same signal. The DAPS321 features an improved video signal processor - MORE INFORMATION. This unit has 12VDC Output of 36 Watts.
Output: Composite video (2x7), 12VDC (3)
Power: 28VDC @ 3 Amps
DAPS350
The DAPS350 will split one VGA input to eight outputs up to 250 feet away. VGA (aka RGB) is the best resolution for computer graphics on your in-flight entertainment system. We recommend that all of our customers use VGA with our monitors and Moving Maps. All cabin monitors from Flight Display Systems accept VGA input. This unit has 12VDC Output of 36 Watts.
Output: VGA (8), 12VDC (3)
Power: 28VDC @ 3 Amps
DAPS440
The DAPS440 will split cabin audio and video from four input sources to four monitors. Individual seat switches (not included) can be wired to a momentary ground to easily switch source inputs.
Output: Composite video, L&R audio (4x1)
Power: 28VDC @ 3 Amps
Documentation:
Supplemental Type Certificate (STC) - Download Certificate
Parts Manufactural Approval (PMA) - Download Certificate
Flight Manual Supplement (FMS) - Download Certificate
